User Instructions

20
Powering on
The saber is switched on/off by pressing the central button located on
the handle.
To turn on the saber, the button must be held down for at least 1 second.
The saber will then automatically power on. As a basis, when it is powered
on for the fi rst time, the saber lights blue.
To turn off the saber, the button must be held down for at least 2 seconds
THEN released. The saber will be powered off only when the button is
released.
Charging the batteries
You must use the charging device provided with your SOLAARI saber to
recharge your batteries. They must be inserted respecting the direction
of polarity shown on the charger (plus side facing the top part of the
charger, with LED lights).
The lights are red during charging and turn to green when charging is
complete. It takes approximately 3h30 to fully charge the two batteries
using a 5V/2A USB power adapter. It takes approximately 5h to charge
with a regular mains adapter.
Silent Mode
You can mute the sound directly from the saber, without having to use
the SOLAARI application. Once you have turned the saber on,
hold the saber’s on/off button for 5 seconds until the sound has been
muted.