User's Manual

Manage navigation
60
Route plan mode :
* Note: In route plan mode, when you move to any candidate
destination, this destination will become start point of route.
1. Turbodog allows you specify
9 destinations at most and 1
start point. After setting up
start point and destinations,
click on button, Tur-
bodog will enter “Routing“
page as shown in picture 5.7
to start routing.
2. After routing, it enters to
“View Route“ page as shown in
picture 5.9 to allow you to view
entire route. You can operate
on map to view proposed
route, navigation simulation
and start navigation. Turbodog
will start navigation after 10
seconds if there is no action
detected.