User's Manual

16
Performing System Restore
To restore the stystem from a backup image:
1. Select Application drawer > System Backup
2. Select the Restore button.
3. Select the backup image location from Backup Loaction drop
down menu.
4. Selectthebackupimagelefromthe Restore content menu.
5. Select Start, and then click OK when prompted.
6. The device reboots automatically upon completing the restore
Note:
• The backup image folder must be placed in the backup folder.
• When backing up only the data, the image shoulf be restored
onthe samermwareversion.Restoringonadifferentrmware
version might create instability or corruption.
Resetting the Device
Soft Reset
Soft reset shuts down and reboots the device. It preserves installed
applications, settings, and saved data.
To perform a soft reset, press and hold the power key for 8 seconds.
Clean Reset
Clean reset restores the system to factory default by erasing all installed
applications, settings and data
To perform a clean reset
1. Select Application drawer > Settings > Backup & reset.
2. Select Factory data reset.
Note:
Clean reset will not erase the data in the internal SD card partition.
To erase the internal SD card contents, select Application drawer >
Settings > Storage > Erase device storage.
Copyright© 2015 Group Sense Mobile-Tech Limited.
All rights reserved.
http://www.gsml.com.hk
Using the Device