DT-08 User Guide
Copyright ................................................................................................. 2 Disclaimer................................................................................................ 2 Regulatory Information........................................................................... 3 Safety Information................................................................................... 6 Getting Started..........................................................................
Regulatory Information Copyright© 2015 Group Sense Mobile-Tech Limited. All rights reserved. No part of this document may be reproduced, distributed, translated, or stored in any form without the prior written permission of Group Sense Mobile-Tech Limited. All brands and product names mentioned herein may be trademarks or registered trademarks of their respective owners.Products specifications are subject to change without prior notice.
Radiation Exposure Statement This device has been tested and found to comply with the following EU Directives: This device is designed, tested, and manufactured to comply with the limits for exposure to RF energy set by international regulatory agencies. The exposure standard for wireless devices employs a unit of measurement known as the specific absorption rate, or SAR.
Please read the following information carefully before using the device for the first time, and keep this User Guide in a safe place for future reference. ■■ Always treat the device with care and keep it in a clean and dust-free environment. ■■ Do not expose the device to extremely hot, cold or humid environment. The operation temperature is from –10°C to 50°C. ■■ Do not use the device in wet or rainy conditions. ■■ Do not charge the device in extremely hot (> °C) or cold conditions (< 0°C).
Charging with the Single Slot Charger Charging with the Multi-slot Cradle 1. Unfasten the power cable cover screw with a screwdriver, and remove the cover. To charge the device with the multi-slot charging cradle: 2. Connect the AC/DC adaptor to the power connector of the charging cradle. 3. Tighten the power cable cover screw to hold the cable in position. 1. Connect the AC/DC adaptor to the power connector of the charging cradle. 2. Plug the AC/DC adaptor into a suitable power socket.
Powering the Device On and Off Power LED Powering on the Device LED colour Description Green Device On Off Device Off Charging LED LED colour Description Flashing orange Charging Solid Orange Fully Charged Solid Red Battery low Off No Charging Press and hold the Power key for 2 seconds to power on the device. Powering off the Device Press and hold the Power key for 2 seconds, and follow the screen instructions to power off the device.
Using NFC Viewing System Information To turn on the NFC feature: 1. Select Application drawer > Settings > About tablet. 2. Scroll to view Model number, Android version, Kernel version, and Build number. 3. Click Status to view Serial number, Battery status, Battery level, IP address, Wi-Fi MAC address, Bluetooth address, and Up time. Using Wi-Fi To connect to a Wi-Fi network: 1. Select Application drawer > Settings > Wi-Fi. 2. Slide the Wi-Fi On/Off switch to the ON position. 3.
Turn to sleep when put in to drawer: Enter sleep mode upon returning to the charging drawer. Performing System Backup • Turn to sleep when put in to cradle: Enter sleep mode upon returning to the charging cradle. To perform system backup: Hiding Screen & Display Items To configure the screen display options (e.g. hide system bar, virtual buttons) in Admin mode and User mode: 1. Select Application drawer > Settings > Display > Admin mode hide configuration / User mode hide configuration. 2.
Using the Device Performing System Restore To restore the stystem from a backup image: 1. Select Application drawer > System Backup 2. Select the Restore button. 3. Select the backup image location from Backup Loaction drop down menu. 4. Select the backup image file from the Restore content menu. 5. Select Start, and then click OK when prompted. 6. The device reboots automatically upon completing the restore Note: • The backup image folder must be placed in the backup folder.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types DT-08 (FCC ID: VRI-B203) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.684 W/kg. . This device was tested for typical body‐worn operations with the back of the handset kept 0mm from the body.
