User's Manual

6
DT430 Expansion Module Overview
Module Model No. Module Type
DT430 (1D) 1D Barcode Scanner
DT430 (2D) 2D Barcode Scanner
DT430 (RFID) RFID Reader
Installing the Expansion Module
To install the Expansion Module
1. Turn over the DT430 handheld terminal.
2. Remove the two screws on the DT430 back cover with a screw driver.
3. Remove the back cover from DT430.
4. Insert the Expansion Module into DT430 module slot, and slide the module until it
fits tightly in the slot.
5. Apply the back cover screws to fasten the Expansion Module.