User's Manual

4
Laser Warning Statement
Barcode scanner expansion module contains Class 2 type laser scan engine. The scanner
and imager engine meet the accessible laser light limits for an CDRH/IEC Class 2 laser
and IEC Class 1M LED product.
The following applies to the scan engine.
 “Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated July 26, 2001.”
 “EN60825-1:1994+ A1:2002 +A2:2001”
 “IEC60825-1:1993+A1:1997+A2:2001”
 “Caution: Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.”
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
A laser warning label such as the one below should appear on the end product.