User's Manual

9
1. Turn over the handheld terminal.
2. Slide the battery latch to the left slightly, and then lift the
battery pack cover up in the direction indicated by the arrow.
3. Insert the battery into the battery compartment. Make sure the
end of the battery pack removal tape is put on the above the
battery pack.
4. Put back the battery pack cover to the compartment as
showed, and then slide the battery latch to the right to double
lock it.
To remove battery
1. Make sure that the Handheld Terminal is turned off. If the
power is on, press and hold the power button to turn off.
2. Slide the battery latch to the left slightly, and then lift the
battery pack cover up.
3. Grasp the battery and lift by pulling up the battery pack
removal tape gently.
Charging battery
To charge the battery