Operation Manual

Amplifier

Owner’s manual

PLUTONIUM

GZPA 1.6500 SPL

GZPA 1.10000SPL

PLEASE READ BEFORE INSTALLATION

Thank you for selecting a GROUND ZERO Plutonium amplifier. We are providing a helpful hints list

which should keep you from experiencing unnecessary shut down

Introduction Class-D Amplifier

Amplifiers provide high-performance sound reinforcement for you mobile audio equipment. It’s versatility enables

compatibility with optional equalizer, frequency dividing network crossovers, and other audio processors in a

customized system.

The Multi-Mode bridging capabilities allow flexibility in hosting several different speaker configurations.

To achieve optimum performance, it is highly recommend that you read this owners manual before beginning the

installation.

Features

• Class-D High Power Amp

• Efficiency >86%

• Damping factor >170 (GZPA 1.6500SPL), >250 (GZPA 1.10000SPL) at 4Ω

• Linkable with 1 amplifier

• 1 Ω stable (Linkmode 2Ω)

• Dual MOS-FET PWM Power Supplies

• Power and Protection indicator

• Lowpass crossover

• Subsonic filter variable

• 180° Phase Shift variable

• Aluminium heat sink

• RCA input / output

• Bassremote control

• +9dB Bass boost

• Operating voltage: DC 10V ~ 18V input

• 2 x 0 Gauge / 50mm² battery Input Connectors

Tools and materials you need

• Screwdriver, electric drill 1/8 carbide drill bit

• Use 0 AWG power wire (min. 50 mm²)

• Ground your amplifier one meter close to installation location

• Use 12 AWG speaker wire or heavier from your amplifier to your speakers

• Look for burs in the path of your wires and file the flat to avoid puncture

• Use 16 AWG wire for remote trigger

Note all wire gauges are based on stranded wire with polarity indicators on two wire configurations.