Instructions / Assembly

WWW.gronomics.com East Bethel, MN USA

763-753-7374

Maintenance Free Elevated Garden Bed

(18” x 36”) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 MF3100 Corner Post, 4" x 4" x 31"

22 MF2952 Side Rail w/ Cleat, 29.5" x 8.25" x 1"

31 MF2950L Side Rail w/ Logo 29.5" x 8.25" x 1"

41 MF2950 Side Rail, 29.5' x 8.25" x 1"

54 MF1200 Side Rail, 12" x 8.25" x 1"

63 MF1300 Bottom Board 13" x 5-3/4" x 3/4"

72MF1300N Corner Notched Bottom Board 13" x 5-3/4" x 3/4"

81 FL3652 Fabric Liner

94 MF4040 Post Cap, 4" x 4" x 1-1/2"

10 8 LP1700 Locking Pin 16"-L

Stack matching pieces in piles. Using the parts list,

locate and count the individual pieces and verify that

you have received the correct number of pieces.

If any pieces are missing or replacement parts are

required, contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly.

This will help prevent damage to the pieces.

NOTE: Ground preparation is optional, however we

recommend leveling area under frame of product, or

place product directly on a flat level surface before

filling with soil.

Parts Identification

Item #: MFEGB 18-36

Packaged & Inspected by: Date:

Side Rail w/Cleat Assembly

Stand one 4” x 4” x 31” corner post (Item 1)

upright with slots facing you and slots facing to

the right.

Locate a 29.5" x 8.25" x 1" side rail w/cleat (Item

2). With the cleat located at the bottom and

facing you, install side rail w/cleat into the lower

slot and push inward until the lock pin hole of the

side rail w/cleat is inside the corner post.

Lower Slot

Cleat

Edit 8/30/2016

PAGE 1
Maintenance Free Elevated Garden Bed (18” x 36”) Assembly Instruction 1 Parts Identification Item #: MFEGB 18-36 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 1 2 3 4 8 5 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. 6 9 7 NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
3 5 Side Rail Assembly Install the Side Rail w/ Logo 29.5" x 8.25" x 1" (Item 3) (w/Logo facing away from you) onto the top of side rail w/cleat. Slide the side rail w/Logo into the slot on the corner post until the lock pin hole of the side rail w/Logo is inside the corner post. Install locking pin (Item 10) through the locking pin hole of the side rail w/Logo and the side rail w/cleat. End Rail Assembly Align two 12" x 8.25" x 1" side rails (Item 5) to the 4” x 4” x 31” corner post slots.
PAGE 3
7 9 Final End And Side Rail Assembly Bottom Board And Post Cap Assembly Place the two remaining 12" x 8.25" x 1" side rails (Item 5) together and place between the two 4” x 4” x 31” corner posts (Item 1). Place three 19" x 5-3/4" x 3/4" bottom boards (Item 6) into the garden bed. Slide the side rails into the corner post slots until the lock pin holes of the side rails are inside the corner posts. Install locking pin through the locking pin hole of the side rails.