Specification Sheet

39 688
RAPID SL
PRODUCT FEATURES: CERTIFICATIONS: AVAILABLE FINISHES:
• ADA
• Massachusetts Plumbing Board Approved
• ASSE 1002
• CSA B45.15
• CSA B125.12
• ASME A112.6.2
• ASME A112.19.5
• ASME A112.1002
• Slim tank fits standard 2” x 4” stud walls
• Dual flush – 0.8gpf and 1.6gpf (3L and 6L)
• Low noise operation – meets strict European
noise (DIN) standards
• No tools required for the installation of the
inspection shaft including protection during
construction phase, for vertical use
• Self-supporting, pre-assembled powder
coated steel frame with quick and lockable
adjustments
• ADA Compliant, bowl rim height adjustment
from 15” to 19”
• Pneumatic discharge valve offering 3 modes of
operation: dual flush, start/stop or single flush
• Tank insulated to prevent condensation
• 2 fixing bolts included, 7- 9in (180-230mm)
mounting screw distance
• ½” water supply connection from top,
integrated angle valve
• Actuation plate sold separately
• TÜV approved for load capacity
• 44” (1.13m) installation height
• CALGreen compliant
• WaterSense® compliant when paired with
listed WaterSense® high efficiency compatible
0.8-1.28gpf (3-4.8lpf) wall hung toilet bowls
STANDARD SPECIFICATION:
SLIM 2” X 4” IN-WALL CARRIER AND
TANK FOR TOILET
NOTE: Install this product according to the installation guide. ADA, CSA compliant when installed to the specific requirements of these regulations.
39688000
Tel: [phone] Fax: [phone]
We reserve the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.grohe.us.
02-10-2021