Instructions

ManualsBrandsGrohe ManualsBuilding Technology & Smart LivingGrohe 22502LN0 Wireless water leak detector set battery-powered, mains-powered

Version 1.3, 21. Mar 2018

For other languages, please go to sensecheck.grohe.com

GROHE SenseCheck

YOUR GUIDE TO THE GROHE SENSE GUARD INSTALLATION

For safety advices, please see the product manual included in the packaging (sensecheck.grohe.com/manual)

The GROHE SenseCheck is designed to help installers and end users with the installation of the GROHE Sense Guard.

We recommend that the SenseCheck is done by an installer together with the inhabitant of the house/end user

where the Guard is being installed.

CAN THE GROHE SENSE GUARD BE INSTALLED AT THE LOCATION?

PLEASE NOTE THAT THE GROHE SENSE GUARD HAS BEEN DEVELOPED FOR THE FOLLOWING SITUATIONS:

 single family houses

 only one person is able to decide to shut off the water supply, without negative impact on other inhabitants

BE AWARE THAT THE GROHE SENSE GUARD CANNOT BE INSTALLED:

 on hot water pipes

 outside the house

 in rooms with frost risk

 when flow pressure is below 0.05 Mpa/0.5 bar/7 psi

 when flow pressure is higher than 1 Mpa/10 bar/145 psi (can be solved by pressure reducer)

 in high pressure gravity pumped water systems

General remark: The micro-leakage test is limited to the cold water pipe. Smaller leakages on the hot water pipe may not be

detected.

Summary of content (11 pages)

PAGE 1
Version 1.3, 21. Mar 2018 For other languages, please go to sensecheck.grohe.com GROHE SenseCheck YOUR GUIDE TO THE GROHE SENSE GUARD INSTALLATION For safety advices, please see the product manual included in the packaging (sensecheck.grohe.com/manual) The GROHE SenseCheck is designed to help installers and end users with the installation of the GROHE Sense Guard. We recommend that the SenseCheck is done by an installer together with the inhabitant of the house/end user where the Guard is being installed.
PAGE 2
Version 1.3, 21. Mar 2018 1. PLAN 1.1 Is there enough room? (between water meter and where pipe splits to the heating system) The GROHE Sense Guard needs to be installed between the water meter and the junction between hot and cold water. GROHE Sense Guard needs to be installed as close to the water meter as possible for maximum water security. Please consider the dimensions below and make sure that there is enough room to install the device downstream.
PAGE 3
Version 1.3, 21.
PAGE 4
Version 1.3, 21. Mar 2018 1.5 Check if the flow pressure is between 0.05 and 1 MPa (0.5 and 10 bar/7 and 145 psi). GROHE Sense Guard operates ideally with an incoming flow pressure between 0.1 and 0.5 MPa (1 and 5 bar/7 and 145 psi). If you are not sure about the water pressure in the house, please contact your water utility. Flow pressure Pressure is between 0.05 and 1 MPa (0.5 and 10 bar/7 and 145 psi) Pressure is below 0.05 MPa (0.
PAGE 5
Version 1.3, 21. Mar 2018 1 Instructions on modifying the GROHE Sense Guard settings for devices with cyclic water draw off: Type of water Impact on GROHE Sense What to do? device Guard One individual draw GROHE Sense Guard might  OPTION 1: off consumes large detect this as a leakage. 1. Adjust maximum outflow of water to a value volumes of water higher (>100l) 2. Turn off AUTOCLOSE on unusual water consumption in the first month. Warnings will still be sent. 3.
PAGE 6
Version 1.3, 21. Mar 2018 1.8 Are any devices installed that have a high water consumption? (downstream of the potential location of the GROHE Sense Guard) If a device with a high water consumption is installed, the GROHE Sense Guard might detect such consumptions as a leak and will shut off the water. Please note that devices that consume more than 50 liters per minute must be installed upstream of the GROHE Sense Guard or the GROHE Sense Guard cannot be used.
PAGE 7
Version 1.3, 21. Mar 2018 2. CONNECT 2.1 Install the GROHE ONDUS App on the Smartphone. To use the GROHE Sense Guard, the GROHE ONDUS App needs to be installed on your smartphone. Please download the app from either the Apple iTunes or Android Google Play stores. Once downloaded, please follow the registration and initiation procedure within the app. 2.2 Connect the GROHE Sense Guard to the home Wi-Fi.
PAGE 8
Version 1.3, 21. Mar 2018 3. INSTALL 3.1 The GROHE Sense Guard physical installation For instructions on installation, please refer to:  the installation movie: grohesenseguard.grohe.com  the general manual and safety advices: sensecheck.grohe.
PAGE 9
Version 1.3, 21. Mar 2018 Please note that push notifications are sent in any case and in any alarm situation. Additional e-mail notifications are only sent for the following highest alert levels:  Flooding (when a GROHE Sense is installed)  Pipe break  Max. water consumption volume has been reached 4. TEST Safety advice The following tests are created to make sure that the system is properly understood.
PAGE 10
Version 1.3, 21. Mar 2018 to the home screen of the ONDUS app and pull down the screen to refresh the overview. 2 3 4 Installations with Sense for increased water security: GROHE Sense triggers GROHE Sense Guard Maximum volume limitation  Install a GROHE Sense in the same House.  Make sure that it is integrated in the same “virtual” house in the GROHE ONDUS app.  Activate the Setting Control via GROHE Sense in the GROHE Sense Guard Settings.  Gently dip the bottom of the GROHE Sense in water.
PAGE 11
Version 1.3, 21. Mar 2018 5 Micro Leakage  The micro-leakage test is conducted automatically overnight and multiple times a day  The GROHE Sense Guard closes the valve for this  In order to avoid high water consumption and as a micro-leakage cannot be easily tested, GROHE recommends not to conduct a micro-leakage test. HELP In case of further questions, contact the GROHE ONDUS customer service at the following addresses, based on your country: Country Contact Country Contact Austria ondus_at@grohe.