Grandera 19 931 English Français Español .....1 .....2 .....3 Grandera Design + Engineering GROHE Germany 99.0051.031/ÄM 226027/03.
Please pass these instructions on to the end user of the fitting! S.v.
23 320 *19 322 32 m m 46 374 19 931 46 375 46 833 *46 627 46 837 2
2 1 2,5 12 mm mm 3 4 2. B A 1.
English Technical data Temperature limiter 5 L/min or 1.3 gpm/60 psi Scalding protection is possible by fitting the included temperature limiter (A). • Max. flow Installation For commissioning, see Fig. [3]. Remove the fitting template, see Fig. [1]. Flush piping system prior and after installation of faucet thoroughly! Flow rate limiter This fitting is equipped with a flow rate limiter, permitting an infinitely variable individual reduction in flow rate.
1. 10mm 8 7 I G m 3m 2. 3.
English II. Install spout, see Figs. [7] and [8]. 1. Determine dimension “Y” from the leading edge of built-in fitting housing to face of tiles, see Fig. [7]. 2. Cut connection nipple (H) so that the installation dimension is “Y” + 1 11/16". 3. Using an 10mm allen key, screw connection nipple (H) into the built-in fitting housing until the installation dimension is 1 7/32". Tighten spout (I) from below using an 3mm allen key, see Fig. [8].
www.grohe.com Grohe America Inc. 241 Covington Drive Bloomingdale, IL 60108 U.S.A. Technical Services Phone: 630/582-7711 Fax: 630/582-7722 Grohe Canada Inc.
