Sander User Manual

Accessories
G9955—Bench Top Dual Fan Dust Filter
Two separately switched fan motors can be used
to draw a maximum 400 CFM of your dusty shop
air though the 5 micron pleated filter. Perfect for
sanding and power carving, the clear plastic hood
helps to direct flow from the work area directly into
the filter.
Figure 10. G9955 Dust Filter.
Figure 9. Half-mask respirator and disposable
cartridge filters
.
H2499—Small Half-Mask Respirator
H3631—Medium Half-Mask Respirator
H3632—Large Half-Mask Respirator
H3635—Disposable Cartridge Filter Pair P100
Wood dust is now considered a known carcino
-
gen and has been linked to nasal cancer and
severe respiratory illnesses. If you work around
dust everyday, a half-mask respirator can be a
lifesaver. Also compatible with safety glasses!
H3275—
1
⁄4" x 25' Coil Hose
These recoil hoses stay neatly coiled when not
in use, yet stretch to full length when needed.
Great for bench-top use when clutter is always a
concern. Coil springs protect ends from kinking.
1
⁄4"NPT.
Figure 8. H3275 Coil Hose.
H3263—5 Pc. Quick Coupler Set
This 5-Pc. Solid Brass Quick Coupler Set includes
one
1
⁄4" NPT female quick coupler, one
1
⁄4" NPT
female thread connector and three
1
⁄4" NPT male
thread connectors.
Figure 7. H3263 Quick Coupler Set.
G6407—60 Grit, 5" Sanding Disc
G6408
—80 Grit, 5" Sanding Disc
G6409
—100 Grit, 5" Sanding Disc
G6410
—120 Grit, 5" Sanding Disc
G6411
—150 Grit, 5" Sanding Disc
G6412
—220 Grit, 5" Sanding Disc
H6604
—280 Grit, 5" Sanding Disc
H6605
—320 Grit, 5" Sanding Disc
H6606
—400 Grit, 5" Sanding Disc
H6607
—500 Grit, 5" Sanding Disc
H6608
—600 Grit, 5" Sanding Disc