LARGE WHEEL NURSERY PUSH CART MODEL H3034 INSTRUCTION SHEET COPYRIGHT © JUNE, 2004 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
PARTS INVENTORY The Model H3034 was carefully packed when it left our warehouse. If you discover this cart is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. A C B Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of your shipment, you should inventory the contents.
ASSEMBLY INSTRUCTIONS When assembling the Model H3034, tighten all nuts and bolts finger tight, then, when the cart is assembled, tighten all nuts and bolts firmly. 4. Slide the handle through the handle housing rings and fasten with M8-1.25 x 40 hex bolts, and lock nuts for the ends, and M8-1.25 x 16 hex bolts for the threaded housing rings (Figure 4). 5. Place the support bar in the bracket on the base and bolt the ends to the legs with M81.25 x 40 hex bolts, flat washers and lock nuts (Figure 4). 6.
H3034 Parts Breakdown and List 1 14, 17, 18 15, 17, 18 5 13 14 16, 17, 18 3 6 4 14,17,18 19, 20 2 9 7 10 11, 12 REF PART# DESCRIPTION REF PART# DESCRIPTION 1 PH3034001 FENCE 12 PH3034012 COTTER PIN 4MM X 42MM 2 PH3034002 TAILGATE 13 PB03M HEX BOLT M8-1.25 X 16 3 PH3034003 HANDLE 14 PB15M HEX BOLT M8-1.25 X 40 4 PH3034004 TAILGATE LATCH 15 PB26M HEX BOLT M8-1.25 X 30 5 PH3034005 SUPPORT BAR 16 PB118M HEX BOLT M8-1.25 X 45 PLN04M LOCK NUT M8-1.
