Work Light User Manual

ManualsBrandsGrizzly ManualsWork LightHALOGEN LAMP H6441

MODEL H6440/H6441

HALOGEN LAMP

INSTRUCTIONS



WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.



1. Only connect this lamp to a properly

grounded 110V power source.

2. Halogen lamps can become very hot.

Securely mount this lamp to a stable

surface that is safely away from com-

bustible materials of any kind. Never

place combustible materials, such as

cloth or paper items, volatile liquids, or

explosive gases, etc., near the lamp at

any time.

3. DO NOT replace the halogen bulb with

a wattage higher than what this lamp is

rated for.

4. To avoid electrical fires or electrocu-

tion, DO NOT allow any liquid to come

in contact with the lamp.

5. To avoid burns or electrocution, turn

the lamp OFF, unplug it from the power

source, and allow it to cool before mak-

ing adjustments or performing mainte-

nance.

6. Children or pets are unaware of the

hazards of a hot halogen lamp. DO NOT

allow children or pets near the lamp.

7. To avoid burns or a fire, never handle

the hot lamp or discard a hot halogen

bulb.

8. For safe operation, never operate this

lamp with missing or broken parts.

(

)

Figure 1.



REF PART # DESCRIPTION

Model H6440:

1 PH6440001 POWER CORD & TRANSFORMER ASSY

2 PH6440002 MOUNTING BASE

3 PH6440003 SUPPORTING ARM ASSEMBLY

4 PH6440004 LAMP HOUSING ASSEMBLY

5 PH6440005 SWITCH ASSEMBLY

6 H3250 HALOGEN BULB ASSY 70 WATT

Model H6441:

1 PH6441001 POWER CORD & TRANSFORMER ASSY

2 PH6441002 MOUNTING BASE

3 PH6441003 SUPPORTING ARM ASSEMBLY

4 PH6441004 LAMP HOUSING ASSEMBLY

5 PH6441005 SWITCH ASSEMBLY

6 H3252 HALOGEN BULB ASSY 50 WATT

Specifications

 

 





Inventory

Summary of content (2 pages)

PAGE 1
MODEL H6440/H6441 HALOGEN LAMP INSTRUCTIONS Specifications 1. Only connect this lamp to a properly grounded 110V power source. 2. Halogen lamps can become very hot. Securely mount this lamp to a stable surface that is safely away from combustible materials of any kind. Never place combustible materials, such as cloth or paper items, volatile liquids, or explosive gases, etc., near the lamp at any time. 3. DO NOT replace the halogen bulb with a wattage higher than what this lamp is rated for. 4.
PAGE 2
Replacing Bulb 1. Turn the lamp OFF, unplug it from the power source, then allow it to cool. 5. To remove the retaining cap and bulb assembly from the reflective cone, push the cap down as you twist it counterclockwise. Note: Notice how the compression spring is mounted on the inside flanges of the retaining cap. 2. Remove the six flat head screws from the cover plate on the back of the lamp housing, as shown in Figure 2. 6.