MEAT GRINDER MODEL H6248 INSTRUCTION MANUAL COPYRIGHT © SEPTEMBER, 2004 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
6. ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PERSONNEL TO OPERATE MACHINERY. Make sure operation instructions are safe and clearly understood. 7. KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe distance from the work area. 8. 9. 13. ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING MACHINERY. Make sure switch is in OFF position before reconnecting. 14. MAKE WORKSHOP CHILD PROOF. Use padlocks, master switches, and remove start switch keys. MAINTAIN MACHINERY WITH CARE.
Additional Safety Instructions For Meat Grinders 1. READ THIS MANUAL: This manual contains proper operating instructions for this machine. 5. LOOSE CLOTHING: DO NOT wear loose clothing while operating this machine. Tie back long hair. 2. ALWAYS CLEAN AND SANITIZE ALL PARTS THAT COME IN CONTACT WITH MEAT DURING PROCESSING. 6. SHARP SURFACES: DO NOT place hands near, or in contact with, cutting surfaces during operation. 3.
INTRODUCTION Foreword Contact Info We are proud to offer the Grizzly Model H6248 Meat Grinder. This model is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satisfaction.
SET UP Inventory Unpacking Your machine left our warehouse in a carefully packed crate or box. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 5469663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. After you have unpacked the carton you should find the following. Figure 1. Model H6248 Inventory. A.
Assembling Grinding Head 1. Loosen the locking knob, and remove the grinding head assembly from the grinder motor housing. 2. Unscrew the lock ring and remove the cutting plate, cutting blade and feed screw. Thoroughly sanitize the grinder head, cutting plates, cutting blade, feed screw, lock ring and attachments (refer to Proper Sanitization on page 9 for information). 3. Before proceeding with assembly, wipe down outside surface of grinder motor housing with a sanitized cloth. 4.
Installing Grinding Head Assembly 1. With the throat of the grinder head pointing up, insert the hex shaft into the grinder motor housing. 2. Tighten the locking knob to secure the grinding head. 3. Set the hopper onto the grinder head throat (refer to the Parts Breakdown on page 11 for more detail). Controls ON/OFF and Circuit Breaker Buttons (Figure 6): Attachments Figure 6. Button location 1. 2. To install a sausage stuffing cone, remove the lock ring, cutting die and cutting blade.
OPERATIONS Grinding If a jam occurs: 1. The Model H6248 is designed for meat processing. DO NOT attempt to grind bone or hard foods like nuts or fibrous foods like ginger. 1. Make sure all meat grinding parts are properly sanitized before beginning (Refer to the Cleaning section on page 9 for more information). 2. Install the fine, medium or course cutting plate. 3. Cut all meats into sizes that will easily fit into the hopper throat. 4. Plug in the grinder and turn it ON. 5.
CLEANING & LUBRICATION Proper Sanitation All surfaces and working parts that have been exposed to meat must be properly sanitized before and after each use. Dishwashers are a good option because they sanitize with heat. If a dishwasher is not available, there are chemical sanitizers on the market that serve the same function. When using chemical sanitizers, make sure they are designed to do the job, and strictly follow the manufacturer’s recommendations for proper use.
Cleaning the motor housing: Lubrication: 1. UNPLUG THE MOTOR FROM THE POWER SOURCE! 2. Wipe down the exterior surface of the motor with a cloth soaked in a sanitizing solution. DO NOT submerge the motor in water! The Model H6248 requires very little lubrication. The following steps on the grinder head parts will keep them moving freely and keep them from oxidizing. Reduce the risk of electrocution by keeping all connections dry. DO NOT touch plugs with wet hands. DO NOT submerge in water.
Parts Breakdown � � �� �� �� �� � � � �������������������� � � � REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART # PH6248001 PH6248002 PH6248003 PH6248004 PH6248005 PH6248006 PH6248007 PH6248008 PH6248009 PH6248010 PH6248011 PH6248012 PH6248013 PH6248014 PH6248015 PH6248016 PH6248017 Model H6248 Meat Grinder DESCRIPTION MEAT PUSHER HOPPER GRINDER MOTOR HOUSING GRINDING HEAD FEED SCREW KUBBE ATTACHMENT-REAR KUBBE ATTACHMENT-FRONT CUTTING PLATE-COURSE LOCK RING CUTTING PLATE-FINE CUTTING PLATE
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name _________________________________________________________________________ Street ________________________________________________________________________ City____________________State________Zip_________ Phone Number____________E-Mail___________________FAX ____________ Model # H6248 Meat Grinder Serial#________________Order #____________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O.
