User Manual
3.
Figure 25
Note: When connecting parts that have a gas-
ket applied to the mounting surface, always
tighten the fasteners in a crisscross man-
ner to ensure the gasket does not become
crimped and the seal compromised.
Figure 25.
4.
Figure 26
Figure 26.
5.
6.
Figure 27
Figure 27.
Note: The collector attaches to each sup-
port bracket. The inside of the collector is
funnel shaped and directs the air around in
a cyclone motion. Make sure that the inside
taper (funnel) is faced downward and the col-
lector inlet faces toward the motor, as shown
in Figure 28
8daaZXidg7dYn
>caZi
>ch^YZ
IVeZg
Figure 28.