Manual



7.        
      

 Note:Use the access holes on each side of
the cabinet to reach the T-bolts on the ends
of the sliding table (Figures 25 & 26). To
access the T-bolt in the center of the sliding
table, tilt the blade to 0° and reach through
the dust port (Figure 27).
Figure 25.
Figure 26.
Figure 27.

8.         
Figure 28
9.        Figure
29Step 1
10.         

Figure 29
Figure 29.


Figure 30.




11.        
Figure 30

Figure 28. 
