Manual



Moving & Placing
Base Unit
To remove the saw base unit from the crate
pallet:
1. 
     

2.        

Figure 19
Figure 19.
3.          

4.    

         

5. 
      Figure 20 

Figure 20.
6. 

      

7. 

Use lifting straps with a minimum of 1500
lbs. lifting capacity. If the lifting strap breaks,
serious personal injury may occur.
This machine and its
components are heavy.
Serious injury may occur
if safe moving methods
are not followed.
Get help when lifting or
moving the machine and
its components. Use a
forklift to reduce the
risk of a lifting strain or
crushing injury.
DO NOT lift the table saw any higher than
necessary to clear the floor. Serious per-
sonal injury and damage to the machine
may occur if safe moving methods are not
followed.