Operation Manual

UK
123
3. Check the blade (3) for wear. Remove
burrs and straighten the guide surfaces
withaatle.
4. Clean the oil channels (32) in
order to guarantee fault-free,
automatic oiling of the saw chain
during operation.
5. Assemble the blade, saw chain and
chain wheel cover and retension the
saw chain (see the “Assembly” chap-
ter).
When the oil channels are in op-
timum condition, the saw chain
automatically sprays a little oil a few
seconds after the saw is started.
Storage
• Cleantheequipmentbeforestorage.
• Storethesawinadry,frost-proofloca-
tion that cannot be accessed by child-
ren.
• Attachthechainguardtostorethe
equipment.
• Donotexposetheequipmenttodirect
sunlight over a prolonged period.
Technical Data
Type ............................................ EKS 610 T
Rated input voltage............. 230V~, 50 Hz
Input power ........................................600 W
Safety class ............................................
II
Protection type ..................................... IPX0
Chain speed ................................... 10,6 m/s
Weight (without guide rail + chain) ... 3,8 kg
Weight (with guide rail + chain) .......4,3 kg
Oiltank ................................................. 70 ml
Chain ...............................Oregon 91P033X
Chain pitch .........................................3/8“
Chain width ...................................1,3 mm
Number of chain drive links ................ 33
Teeth of the sprocket chain wheel ........... 6
Chain bar .................. Oregon 080SDEA041
Length of the chain bar ..............240 mm
Sawing length (max.) .................195 mm
Acoustic pressure level
(L
pA
) .............................88 dB(A); K
pA
=3 dB
Sound power level
measured(L
WA
) .. 100,9 dB(A); K
wA
=3 dB
guaranteed ............................ 104 dB(A)
Vibration ...................5,0 m/s
2
; K= 1,5 m/s
2
Technical and visual changes may be made
without notice during the course of develop-
ment.
Table of maintenance intervals
Machine Part Action
Before
each use
After 10 ope-
rating hours
Komplette Maschine
Check condition, replace damaged
parts if necessary

Accessible screws
and nuts
Tighten

Chain wheel Check, replace if necessary

Saw chain
Check, oil, sharpen or replace if
necessary

Blade Check, turn, clean, oil
 