Operation Manual

UK
119
1. Undo the two screws on the round
handle (10) supplied and take off
the rivet dolly (31).
2. Place the round handle in the
desired position on the telescopic
handle(9)andttherivetdolly.
3. Screw together the round handle
(10) and rivet dolly (31).
4. The height or holding angle of the
round handle can be adjusted at
any time by slightly loosening both
screws, pushing/turning and re-
tightening the screws.
Filling with chain oil
The blade and saw chain must never
be without oil. In case of non-obser-
vance a high level of wear occurs on
the blade and saw chain.
Theequipmentisttedwithanoilingme-
chanism. As soon as the motor is running,
theoilowstotheblade.
• Regularlychecktheoillevelinthe
inspectionwindow(18)andrellwith
oil in time.
• UseGrizzlybiooil,whichcontains
additives to reduce friction and wear.
This can be ordered from our service
centre.
• IfGrizzlybiooilisunavailable,use
chain lubricating oil with a low propor-
tion of adhesive additives.
1. Unscrew the oil tank cap (17) and
pour the chain oil into the tank.
2. Wipe off any spilt oil and close the
oil tank cap.
Initial operation
 Observethecountry-specicand
local authority regulations. Do not
work during commonly accepted or
mandatory rest periods.
• Beforestarting,check:
- The saw chain tension
- The oil level
-
Allnutsandscrewsaresittingrmly
• Ensuresuitableprotectiveclothing.
• Adjusttheworkinglengthofthetelesco-
pic handle before switching on the equip-
ment.
• Removetheprotectivebladecoveronly
at the last minute.
• Putontheshoulderstrap.
• Checkyouarestandingsafely.
• Checkyourworkingsurroundings.
Putting on the shoulder strap
Always wear a shoulder strap
when working with the equip-
ment. Always switch off the
equipment before loosening the
shoulder strap. There is a risk of
accidents.
1. Fix the carabiner hook of the
shoulder strap (20) to the eyelet
(11) on the telescopic handle (9) of
the equipment.
2. Put on the shoulder strap (20) (see
also picture
).
3. Adjust the strap length such that
the carabiner hook is at hip height.