Operation Manual

UK
117
18 Oil level inspection window
19 Chain guard
20 Shoulder strap
21 Oil bottle with 60 ml special
chain oil
22 Combination wrench
23 Screwdriver
24 Spare carbon brushes
Function description
The electric chainsaw with telescopic
handle has an electric motor as the drive.
Operation is with the on/off switch on the
operating handle.
The revolving saw chain is guided over a
blade (guide rail) and performs the cutting
work.
An oiling mechanism ensures continuous
chainlubrication.Theequipmentistted
with various safety functions to protect the
user.
Safety functions
2 Saw chain with limited
rebound
Helps you to absorb rebounds
by means of specially developed
safety devices.
4 Chain interception bolt
Reduces the risk of injury if the
chain splits or jumps off.
12 Start lock
The start lock must be unlocked
in order to start the equipment.
13 On/off switch
The equipment switches off im-
mediately when the on/off switch
is released.
16 Claw stop
Reinforces the stability when
vertical cuts are executed and
makes sawing easier.
20 Shoulder strap
Ensures even load distribution
on shoulder, back, hip and thigh.
Delivery contents
- Electric chain saw with telescopic handle
- Blade
- Saw chain
- Round handle
- Claw stop with 2 cross-head screws
- Chain guard
- Shoulder strap
- Combination wrench
- Allen key (in holder on the equipment)
- Screw driver
- Oil bottle with 60 ml special chain oil
- Spare carbon brushes
Caution! The saw can re-oil.
Please note that the saw re-oils after
use and oil may leak out if it is stored on
its side or on the head. This is a normal
process due to the necessary ventilation
opening on the upper edge of the tank
and does not constitute a reason for com-
plaint. As each saw is checked during
production and tested with oil, a small re-
sidue may be in the tank despite draining,
which may slightly dirty the housing with
oil in transit. Please clean the housing
with a cloth.
Assembly
Always wear protective gloves
when working with the saw chain
and use only original parts. Dis-
connect from the mains before
working on the chainsaw. There is
a risk of injury!
Before activating the equipment, you
must: