user manual

Model G0747/G0748 (Mfg. Since 8/12)
-17-
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Small Item Inventory: (Figure 2) Qty
A. Front Way Cover .......................................... 1
B. Rear Way Cover .......................................... 1
C. Drawbar
7
⁄16"-20 x 23
1
⁄2" ............................... 1
D. Ball Handles ................................................ 3
E. Fine Downfeed Handwheel ......................... 1
F. Ball Handle Handles .................................... 3
G. Toolbox ........................................................ 1
H. Bottle for Oil ................................................ 1
I. Belt Housing Safety Covers (G0747 Only) .. 2
J. Knee Crank ................................................. 1
K. Coarse Downfeed Lever .............................. 1
L. Closed-End Wrench 17 x 19mm.................. 1
M. Phillips Screwdriver #2 ................................ 1
N. Slotted Screwdriver #2 ................................ 1
Figure 2. Small item inventory.
A B
C
E
F
D
I
H
G
L
K
J
N
M