User manual

Model H7669 HVLP Spray Gun -9-
1. Fluid Control: 
 

2. Pattern Control:   


3. Air Flow Control:   

4. Atomizing Cap :   

5. Trigger :    



6. Cup:    
     

7. Regulator/Gauge:  
       

    


 Note: DO NOT attach to an unregulat-
ed air source that exceeds 120 PSI.
Figure 2. 
Figure 3. 
2.        

3.       
 

    

 Note: You have the option of attach-
ing the regulator/guage directly to the
gun as shown in the photos. Some
may find this awkward and would rath-
er mount the regulator/gauge closer
to the air source.
4.        

 Note: For the best results, use a hose
that will be dedicated for spray use
only. Do not use a hose that has been
used with an in-line oiler or other pos-
sible contaminant.
If you need additional help with this assem-
bly, call our Technical Support at: (570)
546-9663.
ControlsAssembly
1. 
Figure 2






