Operation Manual

81
GB
Repair Service
• ContactourServiceCentreforrepairs
not subject to this warranty. Repairs
can be made at normal charges. Our
Service Centre will send you a cost
estimate upon request.
We will handle units in proper packa-
ging and returned postage paid only.
• Attention:Toleacomplaintorser-
vice request at our service address,
please make sure that the unit is cle-
an and that a description of the defect
is included.
Postage not paid - as bulk goods,
express or other special delivery -
returned units will not be accepted
otherwise.
• Defectiveunitsreturnedtouswillbe
disposed of for free.
Technical data
Petrol hedge trimmer ............ BHS 2670 E2
Engine ........single-cylinder two-stroke engine
Displacement ...........................................26 cc
Engine power .................................... 0.75 KW
Maximum engine speed ................10000 rpm
Recommended idling speed ...........3000 rpm
Cuts per minute ..................... 1700 stroke/min
Cutting length .....................................550 mm
Tooth gap .............................................. 27 mm
Tank volume, max. .................................0.46 l
Fuel mixture .............................................. 40:1
Weight .................................................... 5,3 kg
Sound power level (LWA)
................ 106,9 dB(A); KWA = 2,35 dB(A)
Warranted sound power level ....109 dB(A)
Sound pressure level (LpA)
....................95,1 dB(A); KpA = 2,35 dB(A)
Vibration (an)
Front handle ........7,152 m/s
2
; K = 1.5 m/s
2
Rear handle .........3,378 m/s
2
; K = 1.5 m/s
2
Spark plug: ...........................Torch L8 RTC
alternative ................. Champion RC j6Y
Thespeciedvibrationemissionrating
has been benchmarked by a standardised
test method and can be used to compare
different electric tools.
Thespeciedvibrationemissionrating
can also be used to preliminarily assess
the operator‘s exposure.
Warning:
Depending on how the electric tool
is used, the actual vibration emis-
sion rating during operation may
differfromthespeciedone.
It is therefore necessary to take
safety precautions with regard to
the operator. Such precautions are
based on the assessed exposure
under actual operative conditions
(taking into account all parts of the
operating cycle such as downtimes
of the electric tool or times at which
the tool is turned on but is running
at no load).
Noise and vibration ratings have been
determined pursuant to the standards and
regulationsspeciedinthedeclarationof
conformity.
Subjecttotechnicalandopticalmodica-
tions without prior notice in the course of
advancement. There is thus no guarantee
for any sizes, notices or details contained
in these operating instructions. These
operating instructions cannot therefore be
usedasjusticationofanylegalclaims.