Operation Manual

GB
36
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not start
Battery is empty or not
inserted
Check charge level,have re-
pairs carried out by a qualied
electrician, if necessary
Defective start levert
Repair by customer servicesWorn carbon brushes
Defective motor
Grass too long
Set a greater cut heigh
F
.
Lift the front wheels slightly by
pressing down on the handle
bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatisfactory or
motor labours
Cut height too low
Set a higher cut height
F
Blade blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade assembled incorrectly
Install the blade correctly
Blade fails to turn
Blade blocked by grass Remove the grass
Blade screw loose
Tighten the blade screw
Strange noises, rattling or
vibrations
Blade screw loose
Tighten the blade screw
Blade damaged
Replace the blade