Operation Manual

GB
26
• Do not leave the equipment
unattended in the workplace.
• Do not work with equipment
that is damaged, incomplete,
or has been modied without
the authorisation of the ma-
nufacturer. Do not use the
equipment with damaged sa-
fety devices or screens or with
missing safety equipment such
as deection and/or grass coll-
ection devices.
• Do not overload the equip-
ment. Work only within the spe-
cied power range and do not
change the regulator settings
on the motor. Do not use low-
powered machines for heavy
work. Do not use your equip-
ment for purposes other than
those for which it is designed.
• Do not use the equipment near
inammable liquids or gases.
Non-observance will result in a
risk of re or explosion.
• Switch the device o, pull out
the safety key and remove the
battery. Check that all moving
parts are at rest:
- Whenever you leave the ma-
chine,
- Before cleaning the ejec-
tion hole or removing block-
ages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
- Ensure that all nuts, bolts
and screws are tightened
rmly and the equipment is in
safe working condition.
• Check the mower for any da-
mages.
• Repair damaged parts as ap-
propriate.
• Do not place feet or hands
near or under rotating parts.
Do not stand in front of the
grass ejection hole during sick-
le mowing.
• Always pull the circuit breaker/
ignition key if:
- You leave the garden device,
before removing blockages,
- if you are examining,
cleaning or working on the
garden device
- after a collision with a foreign
object. Immediately examine
the device for damages and if
necessary have it repaired,
- if the garden device starts to
vibrate unusually (check im-
mediately!).
Maintenance and Storage
• When servicing the blades,
remember that they can move
even if the power source is o.
• Ensure that all nuts, bolts and
screws are tightened rmly and
the equipment is in safe wor-
king condition.
• Check the mower for any da-
mages.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specied in these
instructions is to be carried out