Operation Manual
GB
33
Cleaning, Maintenance
and Storage
Have work that is not described
in these instructions carried out
by a customer service centre
that we have authorised. Use
only original parts.
Wear gloves when handling the
blade
-
on key (13) and wait for the blades
to come to a stop. There is a risk of
personal injury.
General Cleaning and
Maintenance Work
Do not hose down the lawnmo-
wer with water. Electric shock
hazard
• Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
• After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
• Before each use, check the lawnmo-
wer for obvious defects such as loose,
worn or damaged parts. Check that all
-
ly.
• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary
Changing the Blade
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced
1. Turn the equipment over.
2. Use sturdy gloves and hold the
Turn the blade screw (20) antic-
using a screwdriver.
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
Storage
K
• Keep the equipment dry and out
of reach of children.
• Loosen the wing nuts and fold
down the handle bar so the equip-
ment takes up less space. Ensure
that the cable is not caught.
• Allow the motor to cool before
-
ned space.
• Do not cover the equipment with
nylon bags as moisture could
build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.