Operation Manual

21
GB
Scope of Delivery for Prod. No. 72030292
Device WITHOUT battery
- Cordless hedge trimmer
- Battery
- Battery charger
- Knife guard
- Translation of the original
instructions for use
The illustration how to handle the ap-
pliance can be found on page 2.
Overview
1 Strike guard
2 Safety knife bar
3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/O switch
8 Rear handle
9 Battery
10 Battery release buttons
11 Battery charge state indicator
12 Battery charger
13 Knife guard
14 Guide track
15 Button Battery Indicator
Function Description
The cordless hedge trimmer features
a laser-cut knife of special-grade steel.
When trimming, the cutting teeth move to
and fro in a linear shearing motion. The
strike guard at the tip of the knife prevents
unpleasant kickback reactions when hit-
ting walls, fences, etc. Operators are pro-
tected by the appliance’s two-hand safety
switch and quick-stop brake function.
The hand protection guards your hands
against twigs and branches.
Read the sections below to learn more
about each operating element’s function.
Technical Data
Appliance
Motor voltage ................. 24 V 2.0 Ah
Idling speed ................. 1300 min
-1
(rpm)
Protection class ................................... III
Cutting length ............................520 mm
Length of blades........................562 mm
Cutting capacity...........................15 mm
Weight (with Safety knife bar,
without battery charger) .............2.80 kg
Sound pressure level
(L
pA
) ..........................83 dB(A), K
pA
= 3 dB
Sound power level (L
WA
)
guaranteed..........................101 dB(A)
measured ... 92.4 dB(A); K
WA
= 2.06 dB
Vibration (a
n
) ..........................................
Rear handle ...........2.1 m/s
2
; K=1.5 m/s
2
Front handle ............2.5 m/s
2
; K=1.5 m/s
2
Akku (Li-Ion) ........................24LB2004
Nominal voltage ........................ 24 V
Capacity .......................................2.0 Ah
Charging time .................... approx. 8.5 h
Recharger ................ HYCH0132400500G
Voltage input 100-240V;~50/60Hz; 0.32 A
Voltage output ................... 24V 0.5 A
Protection class ............................... II
Protection category ....................... IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.