Operation Manual
GB
70
plication. The correct power tool will
do the job better and safer at the rate
for which it was designed.
switch does not turn it on and off.
Any power tool that cannot be control-
led with the switch is dangerous and
must be repaired.
-
er source and/or the battery pack
from the power tool before making
any adjust -ments, changing acces-
sories, or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool ac-
cidentaIly.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.
5) CAREFUL HANDLING AND USE OF
BATTERY DEVICES
a) Charge the batteries only in charg-
ers that are recommended by the
manufacturer. Risk of re if a charger
that is suitable for a specic type of
battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the purpose.
The use of other batteries may result
in injuries and risk of re.
c) Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging
of the contacts. A short circuit be-
tween the battery contacts may cause
burns or re.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact
with this. In the event of accidental
contact, rinse off with water. If the
liquid gets into eyes, seek medical
assistance. Leaking battery uid may
cause skin irritations or burns.
6) SERVICE
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Special Safety Directions
1) SPECIAL SAFETY DIRECTIONS
FOR HEDGE TRIMMERS
a) Keep all body parts away from the
blade. Do not attempt to remove
clippings while the blade is operat-
ing or to hold on to material which










