Instruction Manual

 
Mounting Featherboard in Miter Slot
Featherboard
Blade
Workpiece
Figure 95.

4.       






5. 

   Step 4   


Note: The featherboard should be placed
firmly enough against the workpiece to keep
it against the fence but not so tight that it is
difficult to feed the workpiece.
Mounting Featherboards w/Clamps
4.        

5.       

     

6.       
    Figure 94 
Step 5
Figure 94.






1. 

2. 

3. 

Figure 95
1. 

2. 

3. 
       
Figure 94