Instructions

Trouble Shooting

Problem Possible Cause Fault Fixing

Equipment does

not start

Power is o󰀨

Check the socket, cable, wire and

plug and have any repairs carried

out by an electrician

Defective start lever ( 2) or

release button ( 17)

Repair by customer services

Worn carbon brushes

Defective motor

Grass too long

Set a greater cut height. Lift the

front wheels slightly by pressing

down on the handle bar.

Motor stops Blockage by foreign object Remove the foreign object

Result unsatis-

factory or motor

labours

Cut height too low Set a higher cut height

Blade ( 20) blunt

Have the blade sharpened or

replace it

Blade area blocked Clean the equipment

Blade ( 20) assembled in-

correctly

Install the blade correctly

Blade fails to

turn

Blade ( 20) blocked by

grass

Remove the grass

Blade screw ( 21) loose

Tighten the blade screw

Strange noises,

rattling or vibra-

tions

Blade screw ( 21) loose

Tighten the blade screw

Blade ( 20) damaged

Replace the blade

Replacement parts/Accessories

Spare parts and accessories can be obtained at

www.grizzly-service.eu

If you have any other questions, contact the ”Service-Center” (see “Sercice-Center”).