Instructions

GB
23
• Check that only replacement
tools authorised by the manuf-
acturer are used.
Electrical Safety:
• Ensure that the mains voltage
matches the specications on
the rating plate.
• Connect the equipment only to
a socked with a residual cur-
rent-operated protective device
(RCD) with a release current of
more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal
fences, metal posts).
• Use only authorised power ca-
bles of type H05RN-F, which
are no more than 75 m long and
suitable for outdoor use. The
power cable wire cross section
must be at least 2.5 mm
2
. Al-
ways completely unroll cable
drums before use. Check the
cable for damage.
• To x on the power cable, use
the cable suspension intended
for the purpose.
• Keep the power cable away
from the cutting tool when wor-
king. The cutting blades may
damage the power cable and
result in contact with live parts.
Always run the power cable be-
hind the operator.
• Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
• Switch o󰀨 the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the custo-
mer services of the same, or
a qualied person, in order to
avoid hazards.
• Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to
the mains. A damaged power
cable may result in contact with
live parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy plastic casing, a safety switch, a
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the
appliance can be found on page
2-3..
Übersicht
1 Curved handle
2 Start lever
3 2 quick-release levers above to
fasten bow-type handle
4 Lower bar
5 Collision guard
6 2 quick-release levers below to
fasten bar
7 Grass catcher
8 Back wheels