Instructions
75
GB
the impeller wheel continues to
rotate for some time. Danger of
injury due to rotating tool.
Note noise protection laws and lo-
cal regulations.
Turning on and off
objects. Ensure stable positioning.
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
- in blow mode: to the right.
- in suction mode: to the left.
blowing power, press the vol-
- in blow mode: to the left.
- in suction mode: to the right.
Working with the leaf blower
The leaf blower may only be
used for the following purposes:
- As a blower to pile up dry leaf
material or to blow material out
of places that are hard to access
(e.g. under cars)
- As a suction device to suck
up dry leaf material. The device
also functions as a shredder in
the suction function. The dry
leaves are shredded and their
volume is reduced, preparing
the material for later compost-
ing if desired. The shredding
intensity depends on the size of
the leaf material and its residual
moisture.
Uses other than those described
here may damage the machine
and put the operator at risk.
During work, ensure that the de-
vice is not struck against hard
-
ies such as stones, branches or
-
device, in particular the shredding
Repairs of this type
are not covered by the guaran-
tee.
Blowing operating mode:
For safety reasons, make sure
that the protective cover (7) is
mounted on the suction open-
ing.
the blower with a separation distance
-
-
• The guide rollers at the end of the tube