Instructions
74
GB
that the groove on the upper
section of the suction tube is in-
serted into the recess provided
on the lower section of the suc-
tion tube.
sliding the wheel through the
hole of the wheel retaining
turning the second wheel clock-
wise on the wheel bolt.
-
clockwise as far as it will go.
-
ening the screw with star grip
The screw with star grip has to
be tightened as far as it will go
by hand, as otherwise the leaf
vacuum cannot be started later.
tube anti-clockwise.
Installing/removing the
collection bag
-
tion bag installed.
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
tube“).
-
the suction tube.
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
-
der to change the handle position,
release the screw with star grip
and tighten the screw again.
Putting on the carrying strap
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
2. Adjust the length of the strap so
-
3. Attach the snap hook on the
- in blow mode: position
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
11b.
- in suction mode: position
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
11a.
Operating the leaf blower
Danger of injury.
Wear suitable clothing and
work gloves when working with
the device. Make sure that the
device is functioning properly
before every use. Make sure that
the collection bag and the tube
are assembled correctly and the
carrying strap is adjusted cor-
rectly for work.
After releasing the switch, you
use the device if a switch is
damaged. Personal protective
equipment and a fully functional
appliance reduce the risk of in-
juries and accidents.