Instructions
73
GB
-
gether, the blower tubes cannot
be taken apart again!
Initial start-up
- install the blower or suction pipes,
- install the collection bag for suctioning
leaves,
-
take) for blowing leaves.
Caution, Risk of Injury! During
the assembly or disassembly of
the blower pipe, suction pipe,
protective cover or collection
bag, the engine must be turned
have come to a standstill.
Always disconnect the plug
from the mains socket before
working.
Assembling/dismantling the
two-piece blow tube
Never use the leaf blower with
only one blower tube section
attached. There is a risk of per-
sonal injury!
can be felt to lock into place.
that the groove on the upper
section of the blower tube is in-
serted into the recess provided
on the lower section of the
blower tube.
to the blowing aperture of the
3. Place the protective cover of
Turn the protective cover clock-
wise as far as it will go.
tightening the screw with star
The screw with star grip has to
be tightened as far as it will go
by hand, as otherwise the leaf
blower cannot be started later.
-
Assembling/dismantling the
two-piece suction tube
Never use the leaf vacuum with
only one suction tube section
attached. There is a risk of per-
sonal injury!
After the two-part suction tube
has been assembled, it must
not be divided up again into two
parts!
-
and turning the protective cover
be felt to lock into place.