Instructions
GB
99
23 Spiked bumpers
These increase stability when
performing vertical cuts and
also make sawing easier.
Technical Data
Electric chainsaw with
telescopic shaft ����������������EKS 710-20 T
Input voltage
rating............................230-240 V~, 50 Hz
Safety class ......................................... II
Degree of protection .......................... IPX0
Weight (operationally ready) ..approx. 3.98 kg
Input power ..................................... 710 W
Blade bar ..........Oregon 10“ 080SDEA041
(547980)
Chain .......................
Chain speed ....................... max. 11.8 m/s
Oil tank volume ...............................120 ml
Sound pressure level
(L
pA
) .....................85.4 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured ........... 97.9 dB(A), K
WA
= 3 dB
guaranteed .............................101 dB(A)
Vibration (a
h
) on
the handle ...........3.06 m/s
2
;
K= 1.5 m/s
2
the soft handgrip .. 2.71 m/s
2
;
K= 1.5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
on but running without any load).
Icons and symbols
Symbols on the Equipment
Caution!
Read through the instruction manu-
al carefully.
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face pro-
tection, ear protection, safety hel-
met, cut-protection working clothes.
Wear cut-resistant gloves.
Wear cut-resistant work clothing.
Wear anti-slip safety shoes.
Keep the equipment away from
nearby people.
Do not use the hedge trimmer in
the rain or on wet hedges.
Risk of injury from parts being
thrown up.
Danger of death by electrocution!
Keep at least 10m away from
power lines.