Instructions

28
GB
Trouble Shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage not on
Check plug socket, cable, line
and plug, where appropriate,
have repaired through electrical
specialist
On/O󰀨 switch defective
Repair by Service CentreWorn carbon brushes
Defective motor
Device runs with in-
terruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre if
necessary
Internal loose electrical
connection
Repair by Service Centre
On/O󰀨 switch defective
Blades become hot
Blades are blunt
Have the blades sharpened or
replaced (Service Centre)
Blades are notched
Have the blades checked or
replaced (Service Centre)
Too much friction due to
lack of lubrication
Oil the blades
Repairing Service
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged su󰀩ciently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.
Spare parts/Accessories
Spare parts and accessories can
be obtained at
www.grizzlytools-service.eu
If you have any other questions, contact the
”Service-Center” (see ”Service-Center”).