Instructions

52
GB
out too quickly. Use the edge of the
protective cover to keep the appli-
ance away from such obstacles.
Cutting grass
Cut the grass by
swaying the trim-
mer sideways to
the right and left.
Cut slowly while the
trimmer is tilted for-
wards by approx.
30°.
Cut tall grass by a series of levels
from top to bottom.
Vertical cut / lawn edge
trimming
Be particularly careful and at-
tentive when holding the cutter
head vertically. To avoid injuries,
keep enough distance to the
trimming assembly.
Setup for vertical trimming:
Move the appliance to the right
and left in a slow swinging motion
to trim slopes and steep inclines.
• Handle rod: 180° (see )
• Remove the spacer if not nee-
ded.
Setup for edge trimming:
To trim lawn edges, slowly move
the appliance along the lawn edg-
es.
• Handle rod: 90° (see )
• Remove the spacer if not nee-
ded.
Cleaning and maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn o󰀨 the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance with
water and do not immerse it in
water. Electric shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
• After every trimming session, remove
grass and soil from the protective co-
ver and the trimming assembly.
General maintenance
• Prior to every use, check the appli-
ance for obvious defects such as
loose, worn or damaged parts.
Check that the screws in the cutting
disk are tight.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.