Instructions

33
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not
start
Battery ( 7) is empty or
not inserted
Check charge level,have re-
pairs carried out by a qualied
electrician, if necessary
Contact chip
( 17) not inserted
Insert the contact chip
Defective start lever ( 17)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut heigh .
Lift the front wheels slightly by
pressing down on the handle
bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatisfactory or
motor labours
Cut height too low
Set a higher cut height
Blade blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade assembled incorrectly
Install the blade correctly
Messer rotiert nicht
Blade blocked by grass Remove the grass
Blade screw loose
Tighten the blade screw
Strange noises, rattling
or vibrations
Blade screw loose
Tighten the blade screw
Blade damaged
Replace the blade