Instructions

24
GB
Non-observance will result in a
risk of re or explosion.
• Switch the device o󰀨, pull out
the safety key and remove the
battery. Check that all moving
parts are at rest:
- Whenever you leave the ma-
chine,
- Before cleaning the ejection
hole or removing blockages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the equipment has hit a for-
eign object or if strange vibra-
tions occur during work. In this
case, check the equipment for
damage and have it repaired if
applicable.
- Ensure that all nuts, bolts and
screws are tightened rmly
and the equipment is in safe
working condition.
• Check the mower for any da-
mages.
• Repair damaged parts as ap-
propriate.
• Do not place feet or hands
near or verwendet wird, under
rotating parts. Do not stand in
front of the grass ejection hole
during sickle mowing.
• Always pull the circuit breaker/
ignition key if:
- You leave the garden device,
before removing blockages,
- if you are examining,
cleaning or working on the
garden device
- after a collision with a foreign
object. Immediately examine
the device for damages and
if necessary have it repaired,
- if the garden device starts
to vibrate unusually (check
immediately!).
Maintenance and Storage
• When servicing the blades,
remember that they can move
even if the power source is o󰀨.
• Ensure that all nuts, bolts and
screws are tightened rmly and
the equipment is in safe wor-
king condition.
• Check the mower for any da-
mages.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so. Any
work not specied in these inst-
ructions is to be carried out only
by customer service centres
that we have authorised.
• Keep the equipment in a dry loca-
tion and out of reach of children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass
collection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid n-
gers being trapped between the
rotating blades and xed parts
of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.