Use and Care Manual

-48-
Model T28780 T28781 (Mfd. Since 04/20)
BUY PARTS ONLINE AT GRIZZLY.COM !
Scan QR code to visit our Parts Store.
Labels & Cosmetics
grizzly.com
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call [phone] or
go to www.grizzly.com.
WARNING!
WARNING!
INJURY HAZARD!
To reduce risk of short
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
On side of
switch box.
Manufactured for Grizzly in Taiwan
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up long
sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing machine.
5. Before starting, ensure machine is stable and guards are in place.
6. Always keep fingers at least 6" away from spinning cutter.
7. Always feed workpiece against rotation of cutter.
8. Do not use awkward hand positions while feeding workpiece.
9. Reduce risk of kickback by taking multiple passes when removing a large
amount of material.
10. Never operate while intoxicated, distracted, or tired.
11. Do not expose machine to rain or dampness.
MODEL T28781
ROUTER TABLE W/LIFT
& CAST IRON WINGS
Date
SN
Manufactured for Grizzly in Taiwan
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up long
sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing machine.
5. Before starting, ensure machine is stable and guards are in place.
6. Always keep fingers at least 6" away from spinning cutter.
7. Always feed workpiece against rotation of cutter.
8. Do not use awkward hand positions while feeding workpiece.
9. Reduce risk of kickback by taking multiple passes when removing a large
amount of material.
10. Never operate while intoxicated, distracted, or tired.
11. Do not expose machine to rain or dampness.
Date
SN
MODEL T28780
ROUTER TABLE
with LIFT
301
302
303
304
305
306
REF PART # DESCRIPTION REF PART # DESCRIPTION
301 PT28780301 ELECTRICITY LABEL
304 PT28781304 MACHINE ID LABEL (T28781)
302 PT28780302 DISCONNECT POWER LABEL 305 PT28780305 EYE EAR LUNG LABEL
303 PT28780303 GRIZZLY.COM LABEL 306 PT28780306 READ MANUAL LABEL
304 PT28780304 MACHINE ID LABEL (T28780)
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact [phone] or www.grizzly.com.