Use and Care Manual

Customer Service #: [phone] • To Order Call: [phone] • Fax #: [phone]
MACHINE DATA
SHEET
MODEL T1244 ROUTER TABLE WING
INTRODUCTION
Manual Accuracy
We are proud to offer this document with your
new machine! We've made every effort to be
exact with the instructions, specifications, draw-
ings, and photographs of the machine we used
when writing this manual. However, sometimes
we still make an occasional mistake.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match
the manual
. If you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we post all available docu-
mentation on our website at
www.grizzly.com
.
Any updates to this document will be reflected on
our website as soon as complete.
Contact Info
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number
and manufacture date
from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: [phone]
Email: [e-mail]
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [e-mail]
Product Dimensions:
Weight
........................................................................................................................................ 53 lbs.
Router Table Extension Wing Table Size
...............................................................................16" x 27"
Main Specifications:
Mounting Plate Opening Size
............................................................................................... 12
1
⁄8" x 9"
Table Inserts
....................................................................................................................................... 3
Table Insert Inside Diameters
............................................................................... Solid, 32mm, 37mm
Fence Board Size (x 2)
...................................................................................................6" x 15
3
⁄4" x 1"
T-Slot Size
...............................................................................................................................
3
⁄8" x
3
⁄4"
Dust Port Size...................................................................................................................... 2
1
⁄4" – 2
1
⁄2"