Use and Care Manual

Model G1014Z/G1014ZX (Mfd. Since 07/17)
-43-
Figure 82. Table support rod lubrication.
Figure 83. Rocker plate lubrication.
Rocker
Plate
Rocker Plate
Oil Type ....................................... NLGI#2 Grease
Oil Amount .................................................. Dollop
Lubrication Frequency .............................Annually
Clean the rocker plate with mineral spirits and a
rag, and brush a dollop of grease onto the rocker
plate. Move the quick release tension lever for-
ward and backward to spread the grease (see
Figure 83).
Table Support Rod
Oil Type ..................T23962 or ISO 68 Equivalent
Oil Amount .............................................Thin Coat
Lubrication Frequency .............................Annually
Use a shop rag and mineral spirits to wipe away
any built up grime and debris off of the table sup-
port rod, then brush on a thin coat of light machine
oil onto the shaft (see Figure 82). Move the work
table back and forth to distribute the oil.