Use and Care Manual

-30-
Model G1014Z/G1014ZX (Mfd. Since 07/17)
SECTION 4: OPERATIONS
Basic Controls
Refer to Figures 48–52 and the following descrip-
tions to become familiar with the basic controls of
this machine.
Paddle Switch: Turns the motor ON when flipped
up; turns motor OFF when pressed down (see
Figure 49).
Switch Disabling Key: Disables switch when the
yellow key is removed.
Figure 49. Paddle switch location on G1014ZX.
Key
Paddle Switch
Figure 48. Paddle switch location on G1014Z.
Key
Paddle
Switch
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Keep hair, clothing, and
jewelry away from mov-
ing parts at all times.
Entanglement can result
in death, amputation, or
severe crushing injuries!