Replacement Part List

Model G1014Z/G1014ZX (Mfd. Since 07/17)
-55-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
109
109A
65
65
13
12
12
110
32
13
13
112
113
111
12
13
58
41
G1014Z
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
[phone] or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
ABRASION INJURY
HAZARD!
DO NOT place hands
on or near sanding
belt while it is
moving. Serious
injuries may occur!
MODEL G1014Z
COMBINATION SANDER
WARNING!
To reduce risk of serious personal injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Never touch moving sandpaper.
5. Support workpiece with miter gauge, backstop, or worktable.
6. Only remove jammed pieces when sandpaper is stopped.
7. Do not wear loose clothing, gloves, jewelry, or other articles that can get
entangled. Tie back long hair and roll up sleeves.
8. Turn motor OFF and disconnect power before changing sandpaper, making
adjustments, or servicing.
9. Do not operate under influence of drugs or alcohol, or when tired.
10. Prevent unauthorized use by children or untrained users; restrict access or
disable machine when unattended.
Motor: 3/4 HP, 110V/220V, 1-Phase, 60 Hz
(Prewired: 110V)
Full Load Amps: 12A (110V); 6A (220V)
Belt Arm Tilt: 0-90°
Sanding Belt Size: 6" X 48"
Sanding Belt Speed: 2300 FPM
Sanding Disc Diameter: 9"
Sanding Disc Speed: 3450 RPM
Weight: 117 lbs.
Mfd. for Grizzly in Taiwan
Date
S/N
Specifications
104
128
136
135
134
133
131
130
129
G1014Z Stand
G1014Z Labels & Cosmetics
REF PART # DESCRIPTION
12 P1014Z012 HEX NUT 5/16-18
13 P1014Z013 FLAT WASHER 5/16
32 P1014Z032 HEX BOLT 5/16-18 X 1/2
41 P1014Z041 HEX BOLT 5/16-18 X 1
58 P1014Z058 RUBBER FOOT
65 P1014Z065 CARRIAGE BOLT 5/16-18 X 5/8
109 P1014Z109 LEG
109A P1014Z109A STAND ASSEMBLY
110 P1014Z110 LOWER BRACE (LONG)
111 P1014Z111 LOWER BRACE (SHORT)
112 P1014Z112 UPPER BRACE (LONG)
113 P1014Z113 UPPER BRACE (SHORT)
REF PART # DESCRIPTION REF PART # DESCRIPTION
104 P1014Z104 MACHINE ID LABEL 133 P1014Z133 ABRASION INJURY HAZARD
128 P1014Z128 MODEL NUMBER LABEL 134 P1014Z134 GLASSES/RESPIRATOR LABEL
129 P1014Z129 READ MANUAL LABEL 135 P1014Z135 DISCONNECT POWER LABEL
130 P1014Z130 TOUCH-UP PAINT, GRIZZLY GREEN 136 P1014Z136 ELECTRICITY LABEL
131 P1014Z131 TOUCH-UP PAINT, GRIZZLY BLACK