User Manual

Before connecting to the network, check the signal strength of the Wi-Fi:
1. Plug in the charger. Ensure indicator light is alternating Blue and Purple.
2. Open the W-Fi settings on your phone or desktop.
3. Select the network UC_Smart_[ChargerSerial#].
4. Open the internet browser on your device.
5. Enter the IP address 192.168.4.1 into the browser search bar.
6. A webpage will load select the Show Available Networks button.
7. A list of available networks will display with RSII Strength and Encryption Type.
RSII in dBm Signal Strength
50 Excellent
60 Very Good
70 Good
80 Low
90 Very Low
0 No Signal
The RSSI must be between 50-79 to update the charger and use smart features. If the RSSI reading is above 80 install a
Wi-Fi repeater to increase the signal strength or move the Wi-Fi router closer to the charger.
Signal Strength