User Manual

Update Charging Station Firmware
1. Ensure the device shows as Connected on acharger.ca. Ensure the charger is not connected to the vehicle.
2. On the Charging Stations tab select the Smart Charging Station. The outline box will appear red when the station is
selected.
3. On the selected charger view the Firmware Update button in the top menu. The Firmware Update button will be
available and will display the latest firmware version if an update is available. If an update is not available the button
will be greyed out.
4. Select the Firmware Update button. The Firmware Update box will open.
5. Select the Start Upload button.
6. Wait for Upload Stage 1 and Upload Stage 2 to complete. Do not interrupt Wi-Fi connection or disconnect the unit’s
power during the update. When the update is complete both stages will be at 100% and the charger indicator light
will go back to Blue/Light Blue alternating.
Note: If you get a message stating:
Your station rmware version must be 05.26 and
greater. Please contact manufacturer.
Power cycle the charger by unplugging it and
plugging it back in to synchronize the rmware with
the portal.