User Manual
Table Of Contents
- 1. Introduction and Unpacking
- 2. Installation Planning and Service Wiring
- 3. Maximum Current Output
- 4. Mounting Bracket
- 5. EasyEvPlug Holster and Cable Management System
- 6. Charging Status Indicators and Buzzers
- 7. Grizzl-E Mini Smart Features
- 8. Operation
- 9. General Product Care and Use
- 10. Warranty and Return Policy
4
Overall Warnings and Cautions
Basic precautions should always be followed when using electrical products, including the
following:
• Read all the instructions before using this product.
• Children should not use this device.
• Do not put fingers into the EV connector.
• Do not touch live electrical parts.
• Do not use this product if the flexible power cord or EV cable is ragged, has broken
insulation, or any other signs of damage.
• Improper connection of the equipment grounding conductor can result in a risk of electric
shock. Check with a licensed electrician if you are unsure whether the product is properly
connected and grounded.
Repair and Maintenance Clause
• All United Chargers products do not require routine maintenance. However, periodic
inspections should be conducted to ensure that all parts remain in good working order
and no damage exists.
• Do not attempt to open, disassemble, repair, tamper with, or modify any components of
the products. Contact United Chargers for any repairs.
WARNING: This equipment is intended only for charging vehicles
that do not require ventilation during charging. Please refer to your
vehicle’s owner’s manual to determine ventilation requirements.
CAUTION: The service wiring in this section are specific to North
America. Before installing the Charging Station, identify the type
of utility service connection onsite. If unsure about the connection
available at the service panel, contact a licensed electrician.