User Manual
Table Of Contents
- 1. Introduction and Unpacking
- 2. Installation Planning and Service Wiring
- 3. Maximum Current Output
- 4. Mounting Bracket
- 5. EasyEvPlug Holster and Cable Management System
- 6. Charging Status Indicators and Buzzers
- 7. Grizzl-E Mini Smart Features
- 8. Operation
- 9. General Product Care and Use
- 10. Warranty and Return Policy
3
Grizzl-E EV Mini EV Charging Station
The Grizzl-E Mini Edition is the small, versatile, and portable EV charging station with a NEMA
4 Indoor/Outdoor aluminum cast enclosure. Made in Canada and built for any environment.
Grizzl-E Mini provides up to 10kW of power to your vehicle and can be set to multiple current
ratings for 240V and 120V outlets.
The Grizzl-E Mini Edition has easy-to-adjust smart features to change settings for different
charging locations, monitor the charger, and set charging schedules.
IMPORTANT SAFETY INSTRUCTIONS
This document contains instructions and warnings that must be followed when installing
and using the GRIZZL-E Mini Electric Vehicle Supply Equipment (EVSE). Before installing or
using the EVSE, read this document, including any WARNING and CAUTION symbols.
The symbols used have the following meaning:
Warning: risk of personal injury
Warning: risk of fire
Warning: risk of electric shock Caution: risk of damage to equipment
• This document provides instructions for the charging station and should not be used for
any other product.
• Before installing or using this product, review this manual carefully and consult a licensed
contractor, licensed electrician, or trained installation expert to ensure compliance with
local building codes and safety standards.
• Consult a licensed electrician to ensure that you can safely install and use this product.
• Ensure that the materials and installation procedures follow local building codes and
safety standards.
• The information in this manual does not exempt the user from following all applicable
codes or safety standards.